Replace Battery In Vivint Motion Detector You do not not need to take

Vivint Motion Detector Battery Replacement. Vivint Support The positive side of the battery should be pointing to the right of the sensor You can then pull the detector off of the bracket to access the battery inside.

The positive side of the battery should be pointing to the right of the sensor If your sensor has a screw at the bottom securing it to the mounting plate, please refer to Vivint Motion Sensor (PIR1) - Change Battery.

Replace Battery In Vivint Motion Detector You do not not need to take

Before changing the battery, make sure that your system is disarmed and note that you may here some beeping from the panel when you open the motion detector To open the sensor, use a small screwdriver to remove the screw at the bottom of the detector Push upward with your thumbs to slide the detector off.

Change Battery In Vivint Motion Detector VPir2345 3 set the left. Before changing the battery, make sure that your system is disarmed and note that you may here some beeping from the panel when you open the motion detector CR123A batteries (x2) Disarm your system then remove the sensor from its mounting plate Slide the sensor up to remove it

How To Change The Battery In An Adt Motion Detector Adt motion. Motion Detector (PIR2) You will need two CR123A batteries for your motion detector Unfortunately, this coating interferes with the connection to your Vivint device.